|
|
| 1. Gang Rip Saw Blades With 2 Rakers - L13 | L13 |
Design:
-Tooth configuration: Flat Top
-Cutting material: TC
-Two tungsten carbide rakers
Application:
-For ripping soft and hardwoods, dry up to 15% wood moisture
-On gang-rip saws with one or two shafts
(A) 1 square keyway 3/8" x 3/8"
(D) 2 round keyways 3/8" x 3/8" + 1 round keyway 1/2" x 1/2"
(G) 1 pin hole 7/" diam. on " bolt circle
Other sizes available on request
| Sku | Diameter | Teeth | Kerf | Plate | Bore | Price | Add to Cart | | L13250 (A) | 10" |
10 Flat Top + 2 Rakers |
0.125" |
0.083" |
2 3/8" |
$251.00 |
| L13300 (D) | 12" |
12 Flat Top + 2 Rakers |
0.125" |
0.083" |
2 15/16" |
$266.50 |
| L13302 (D) | 12" |
12 Flat Top + 2 Rakers |
0.150" |
0.109" |
2 15/16" |
$208.80 |
| L13350 (D) | 14" |
14 Flat Top + 2 Rakers |
0.160" |
0.120" |
2 1/2" |
$293.30 |
| L13352 (G) | 14" |
16 Flat Top + 2 Rakers |
0.125" |
0.083" |
4" |
$241.50 |
| 
Click To Enlarge | |
| 2. Gang Rip Saw Blades With 2+2 Rakers - L14 | L14 |
Design:
-Tooth configuration: Flat Top
-Cutting material: TC
-Two chip clearance rakers and two wiper slots
Application:
-For ripping soft and hardwoods, wet or frozen
-On single and gang-rip saws with one or two shafts
(A) 1 square keyway 3/8" x 3/8"
(D) 2 round keyways 3/8" x 3/8" + 1 round keyway 1/2" x 1/2"
(G) 1 pin hole 7/" diam. on " bolt circle
Other sizes available on request
| Sku | Diameter | Teeth | Kerf | Plate | Bore | Price | Add to Cart | | L14250 (A) | 10" |
18 Flat Top + 2 + 2 Rakers |
0.174" |
0.110" |
2 3/8" |
$224.20 |
| L14300 (D) | 12" |
20 Flat Top + 2 + 2 Rakers |
0.197" |
0.125" |
2 15/16" |
$261.00 |
| L14350 (D) | 14" |
24 Flat Top + 2 + 2 Rakers |
0.197" |
0.125" |
2 1/2" |
$301.80 |
| L14352 (G) | 14" |
24 Flat Top + 2 + 2 Rakers |
0.197" |
0.125" |
4" |
$301.80 |
| 
Click To Enlarge | |
| 3. Thin Kerf Rip Saw Blades - L21TK | L21TK |
Design:
-Tooth configuration: Flat Top
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For ripping dry soft and hardwoods
-On table saws or gang-rip saws
| Sku | Diameter | Teeth | Kerf | Plate | Bore | Price | Add to Cart | | L21250TK | 10" |
24 Flat Top |
0.098" |
0.071" |
5/8" |
$116.05 |
| L21251TK | 10" |
24 Flat Top |
0.134" |
0.087" |
5/8" |
$101.15 |
| 
Click To Enlarge | |
| 4. Thin Kerf Rip Saw Blades - L21TK | L21TK |
Design:
-Tooth configuration: Flat Top
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For ripping dry soft and hardwoods
-On table saws or gang-rip saws
| Sku | Diameter | Teeth | Kerf | Plate | Bore | Price | Add to Cart | | L21250TK | 10" |
24 Flat Top |
0.098" |
0.071" |
5/8" |
$116.05 |
| L21251TK | 10" |
24 Flat Top |
0.134" |
0.087" |
5/8" |
$101.15 |
|
Click To Enlarge | |
| 5. Thin Kerf Cross Cut Saw Blades - L03TK | L03TK |
Design:
-Tooth configuration: ATB
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For cross cutting and ripping dry soft and hardwoods, plywood and veneered plywoods
-Not recommended to cut stock over 3/4" without the use of stabilizer flanges
| Sku | Diameter | Teeth | Kerf | Plate | Bore | Price | Add to Cart | | L03200TK | 8" |
34 ATB |
0.090" |
0.063" |
5/8" |
$103.25 |
| L03250TK | 10" |
40 ATB |
0.090" |
0.063" |
5/8" |
$115.00 |
| L03300TK | 12" |
48 ATB |
0.090" |
0.063" |
1" |
$149.50 |
| L03350TK | 14" |
54 ATB |
0.090" |
0.063" |
1" |
$209.45 |
| 
Click To Enlarge | |
| 6. Heavy Duty Rip Saw Blades - L18 | L18 |
Design:
-Tooth configuration: Flat Top
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For ripping dry soft and hardwoods
-On table saws or gang-rip saws with one or two shafts
| Sku | Diameter | Teeth | Kerf | Plate | Bore | Price | Add to Cart | | L18250 | 10" |
18 Flat Top |
0.126" |
0.087" |
5/8" |
$107.85 |
| L18300 | 12" |
24 Flat Top |
0.160" |
0.110" |
1" |
$129.45 |
| L18350 | 14" |
24 Flat Top |
0.170" |
0.118" |
1" |
$157.80 |
| L18400 | 16" |
30 Flat Top |
0.174" |
0.118" |
1" |
$200.50 |
| L18450 | 18" |
40 Flat Top |
0.189" |
0.134" |
1" |
$249.15 |
| 
Click To Enlarge | |
| 7. Standard Rip Saw Blades - L21 | L21 |
Design:
-Tooth configuration: Flat Top
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For ripping dry soft and hardwoods
-On table saws or gang-rip saws with one or two shafts
L21300-70, L21350-70- SCM with 2 keyways 20 x 5 mm
| Sku | Diameter | Teeth | Kerf | Plate | Bore | Price | Add to Cart | | L21200 | 8" |
24 Flat Top |
0.130" |
0.087" |
5/8" |
$97.50 |
| L21225 | 9" |
24 Flat Top |
0.130" |
0.087" |
5/8" |
$113.50 |
| L21250 | 10" |
24 Flat Top |
0.142" |
0.095" |
5/8" |
$107.85 |
| L21300 | 12" |
30 Flat Top |
0.160" |
0.110" |
1" |
$146.65 |
| L21300-70 | 12" |
30 Flat Top |
0.160" |
0.110" |
70mm |
$159.95 |
| L21350 | 14" |
30 Flat Top |
0.170" |
0.118" |
1" |
$167.80 |
| L21350-70 | 14" |
30 Flat Top |
0.170" |
0.118" |
70mm |
$181.10 |
| L21400 | 16" |
36 Flat Top |
0.170" |
0.118" |
1" |
$197.20 |
| 
Click To Enlarge | |
| 8. Glue Line Rip Saw Blades ATB - L2A | L2A |
Design:
-Tooth configuration: ATB
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For glue line ripping dry soft and hardwoods
-Extra smooth cut for gluing applications
-On table saws
| Sku | Diameter | Teeth | Kerf | Plate | Bore | Price | Add to Cart | | L2A200 | 8" |
24 ATB |
0.130" |
0.087" |
5/8" |
$99.65 |
| L2A225 | 9" |
24 ATB |
0.135" |
0.087" |
5/8" |
$116.70 |
| L2A250 | 10" |
24 ATB |
0.138" |
0.095" |
5/8" |
$110.00 |
| 
Click To Enlarge | |
| 9. Glue Line Rip Saw Blades TCG - L22 | L22 |
Design:
-Tooth configuration: TCG
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For glue line ripping dry soft and hardwoods
-Extra smooth cut for gluing applications
-On straight line rep saws, gang-rip saws and table saws
L22306-2, L22350-2- Deihl Machines with 9/16" pinhole
L22306-318, L22350-318- Mereen-Johnson
L22306-70, L22350-70- SCM with 2 keyways 20 x 5mm
| Sku | Diameter | Teeth | Kerf | Plate | Bore | Price | Add to Cart | | L22250 | 10" |
24 TCG |
0.142" |
0.095" |
5/8" |
$120.15 |
| L22306 | 12" |
36 TCG |
0.160" |
0.110" |
1" |
$150.90 |
| L22306-2 | 12" |
36 TCG |
0.160" |
0.110" |
2" |
$168.40 |
| L22306-318 | 12" |
36 TCG |
0.160" |
0.110" |
3 1/8" |
$159.00 |
| L22306-70 | 12" |
36 TCG |
0.160" |
0.110" |
70mm |
$166.95 |
| L22350 | 14" |
36 TCG |
0.170" |
0.118" |
1" |
$178.15 |
| L22350-2 | 14" |
36 TCG |
0.169" |
0.118" |
2" |
$197.90 |
| L22350-318 | 14" |
36 TCG |
0.169" |
0.118" |
3 1/8" |
$192.75 |
| L22350-70 | 14" |
36 TCG |
0.169" |
0.118" |
70mm |
$191.20 |
| L22400 | 16" |
36 TCG |
0.174" |
0.118" |
1" |
$200.15 |
| 
Click To Enlarge | |
| 10. Gang Rip Saw Blades With Chip Limiters - L12 | L12 |
Design:
-Tooth configuration: Flat Top
-Cutting material: TC
-Expansion slots: Cu plugged
-Saw body with chip thickness limiters
Application:
-For ripping dry soft and hardwoods
-On gang-rip saws
| Sku | Diameter | Teeth | Kerf | Plate | Bore | Price | Add to Cart | | L12250 | 250mm |
24 Flat Top |
3.2mm |
2.2mm |
70mm |
$132.65 |
| L12300 | 300mm |
28 Flat Top |
3.2mm |
2.2mm |
70mm |
$155.70 |
| L12350 | 350mm |
24 Flat Top |
3.2mm |
2.2mm |
70mm |
$192.60 |
| 
Click To Enlarge | |
| 11. Gang Rip Saw Blades With Chip Limiters - L02 | L02 |
Design:
-Tooth configuration: Flat Top
-Cutting material: TC
-Expansion slots: Cu plugged
-Saw body with chip thickness limiters
Application:
-For ripping dry soft and hardwoods
-On table saws and sliding table saws
-Ideal for hand fed operations
| Sku | Diameter | Teeth | Kerf | Plate | Bore | Price | Add to Cart | | L02250 | 250mm |
24 Flat Top |
3.2mm |
2.2mm |
5/8" |
$114.00 |
| L02300 | 300mm |
28 Flat Top |
3.4mm |
2.4mm |
1" |
$152.40 |
| L02350 | 350mm |
32 Flat Top |
3.8mm |
2.8mm |
1" |
$162.55 |
| L02400 | 400mm |
36 Flat Top |
3.8mm |
2.8mm |
1" |
$217.45 |
| L02450 | 450mm |
40 Flat Top |
4.0mm |
2.8mm |
1" |
$265.25 |
| L02500 | 50mm |
44 Flat Top |
4.2mm |
3.0mm |
1" |
$319.80 |
| 
Click To Enlarge | |
| 12. Radial Arm Saw Blades - L07 | L07 |
Design:
-Tooth configuration: 4 ATB and 1 Raker
-Cutting material: TC
-Expansion slots: Cu plugged
-0 degree hook angle reduces the tendency of the blade grabbing the material
Application:
-For cross cutting and ripping dry soft and hardwoods
-On radial arm saws and other saws where the blade is above the work piece
| Sku | Diameter | Teeth | Kerf | Plate | Bore | Price | Add to Cart | | L07250 | 10" |
24 (2ATB + Raker) |
0.135" |
0.095" |
5/8" |
$115.30 |
| L07300 | 12" |
36 (2ATB + Raker) |
0.150" |
0.110" |
1" |
$159.20 |
| L07350 | 14" |
40 (4ATB + Raker) |
0.165" |
0.118" |
1" |
$191.80 |
| L07400 | 16" |
40 (4ATB + Raker) |
0.165" |
0.118" |
1" |
$208.50 |
| 
Click To Enlarge | |
| 13. Cross Cut Saw Blades - L03 | L03 |
Design:
-Tooth configuration: ATB
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For cross cutting and ripping dry soft and hardwoods, plywood, masonite and raw MDF panels
-On table saws, sliding table saws and cut-off saws
| Sku | Diameter | Teeth | Kerf | Plate | Bore | Price | Add to Cart | | L03150 | 6" |
30 ATB |
0.125" |
0.087" |
5/8" |
$113.85 |
| L03180 | 7" |
30 ATB |
0.125" |
0.087" |
5/8" |
$114.55 |
| L03200 | 8" |
40 ATB |
0.125" |
0.087" |
5/8" |
$114.45 |
| L03225 | 9" |
40 ATB |
0.125" |
0.087" |
5/8" |
$114.45 |
| L03250 | 10" |
40 ATB |
0.125" |
0.087" |
5/8" |
$114.45 |
| L03300 | 12" |
48 ATB |
0.135" |
0.095" |
1" |
$154.25 |
| L03350 | 14" |
60 ATB |
0.155" |
0.110" |
1" |
$201.90 |
| L03400 | 16" |
60 ATB |
0.155" |
0.110" |
1" |
$242.00 |
| L03450 | 18" |
60 ATB |
0.180" |
0.134" |
1" |
$283.75 |
| L03500 | 20" |
80 ATB |
0.180" |
0.134" |
1" |
$351.90 |
| 
Click To Enlarge | |
| 14. Cross Cut Saw Blades - L09 | L09 |
Design:
-Tooth configuration: ATB
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For cross cutting and ripping dry soft and hardwoods, plywood, masonite and raw MDF panels
-On table saws, sliding table saws and cut-off saws
| Sku | Diameter | Kerf | Plate | Bore | Teeth | Price | Add to Cart | | L09300 | 12" |
0.135" |
0.095" |
1" |
60 |
$173.55 |
| L09400 | 16" |
0.155" |
0.110" |
1" |
80 |
$276.65 |
| L09450 | 18" |
0.180" |
0.134" |
1" |
80 |
$323.55 |
| L09500 | 20" |
0.180" |
0.134" |
1" |
100 |
$400.35 |
| 
Click To Enlarge | |
| 15. Cross Cut Saw Blades - L19 | L19 |
Design:
-Tooth configuration: TCG
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For cross cutting and ripping dry soft and hardwoods, composite materials plastic laminated (single sided)
-On table saws, sliding table saws and cut-off saws
| Sku | Diameter | Kerf | Plate | Bore | Teeth | Price | Add to Cart | | L19225 | 9" |
0.126" |
0.087" |
5/8" |
40 |
$116.70 |
| L19250 | 10" |
0.126" |
0.087" |
5/8" |
40 |
$114.55 |
| L19300 | 12" |
0.135" |
0.095" |
1" |
48 |
$172.25 |
| L19301 | 12" |
0.134" |
0.095" |
1" |
60 |
$151.75 |
| L19350 | 14" |
0.155" |
0.110" |
1" |
60 |
$191.20 |
| L19400 | 16" |
0.155" |
0.110" |
1" |
80 |
$272.55 |
| L19450 | 18" |
0.180" |
0.134" |
1" |
80 |
$329.50 |
| L19500 | 20" |
0.180" |
0.134" |
1" |
100 |
$400.25 |
| 
Click To Enlarge | |
| 16. Combination Saw Blades - L55 | L55 |
Design:
-Tooth configuration: 4 ATB and 1 Raker
-Cutting material: TC
-Four ATB teeth and one raker with deep gullet allow for deeper cuts and improved chip-flow
Application:
-For cross cutting and ripping dry soft and hardwoods, plywood and particleboard
-On table saws, sliding table saws and cut-off saws
| Sku | Diameter | Kerf | Plate | Bore | Teeth | Price | Add to Cart | | L55180 | 7" |
0.125" |
0.087" |
5/8" |
40 |
$111.95 |
| L55200 | 8" |
0.125" |
0.087" |
5/8" |
40 |
$111.95 |
| L55225 | 9" |
0.125" |
0.087" |
5/8" |
40 |
$114.10 |
| L55250 | 10" |
0.138" |
0.095" |
5/8" |
50 |
$110.45 |
| L55300 | 12" |
0.155" |
0.110" |
1" |
60 |
$162.20 |
| L55350 | 14" |
0.165" |
0.118" |
1" |
70 |
$218.00 |
| L55400 | 16" |
0.165" |
0.118" |
1" |
80 |
$268.00 |
| 
Click To Enlarge | |
| 17. Standard Cross Cut Saw Blades - L04 | L04 |
Design:
-Tooth configuration: ATB
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For general cut-off and trimming of soft and hardwoods, plywood and composite panel materials, wood veneered (single sided), or (double sided) using a pre-scoring unit
-On table saws, sliding table saws and cut-off saws
L04302- Altendorf, Omga, SCMI, Striebig
| Sku | Diameter | Kerf | Plate | Bore | Teeth | Price | Add to Cart | | L04180 | 7" |
0.125" |
0.087" |
5/8" |
40 |
$123.95 |
| L04200 | 8" |
0.125" |
0.087" |
5/8" |
48 |
$127.80 |
| L04225 | 9" |
0.125" |
0.087" |
5/8" |
60 |
$146.15 |
| L04250 | 10" |
0.125" |
0.087" |
5/8" |
60 |
$118.65 |
| L04302 | 300mm |
3.4mm |
2.4mm |
30mm |
72 |
$188.75 |
| L04300 | 12" |
0.135" |
0.095" |
1" |
80 |
$188.75 |
| L04350 | 14" |
0.150" |
0.110" |
1" |
80 |
$221.65 |
| L04400 | 16" |
0.160" |
0.118" |
1" |
100 |
$297.60 |
| L04450 | 18" |
0.180" |
0.134" |
1" |
100 |
$347.80 |
| L04500 | 20" |
0.180" |
0.134" |
1" |
120 |
$431.95 |
| 
Click To Enlarge | |
| 18. Standard Cross Cut Saw Blades - L23 | L23 |
Design:
-Tooth configuration: TCG
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For general cut-off and trimming of plastic laminated materials (single sided), or (double sided) using a pre-scoring unit
-On table saws, sliding table saws and cut-off saws
L23302- Altendorf, Omga, SCMI, Striebig
L23408- Midwest Automation
L23158- Modulus2000
| Sku | Diameter | Kerf | Plate | Bore | Teeth | Price | Add to Cart | | L23158 | 6 1/4" |
0.110" |
0.080" |
2 11/16" |
40 |
$120.80 |
| L23200 | 8" |
0.126" |
0.087" |
5/8" |
48 |
$126.65 |
| L23225 | 9" |
0.126" |
0.087" |
5/8" |
60 |
$148.65 |
| L23250 | 10" |
0.126" |
0.087" |
5/8" |
60 |
$121.25 |
| L23302 | 300mm |
3.4mm |
2.4mm |
30mm |
72 |
$195.20 |
| L23300 | 12" |
0.135" |
0.095" |
1" |
80 |
$195.20 |
| L23350 | 14" |
0.150" |
0.110" |
1" |
80 |
$226.50 |
| L23400 | 16" |
0.160" |
0.118" |
1" |
100 |
$310.50 |
| L23408 | 16" |
0.187" |
0.134" |
1" |
100 |
$370.60 |
| L23450 | 18" |
0.180" |
0.134" |
1" |
100 |
$373.50 |
| L23500 | 20" |
0.180" |
0.134" |
1" |
120 |
$457.60 |
| 
Click To Enlarge | |
| 19. Fine Cross Cut Saw Blades - L06 | L06 |
Design:
-Tooth configuration: ATB
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For fine cut-off and trimming of soft and hardwoods, plywood, wood veneered and plastic laminated panel materials
-On table saws, sliding table saws and cut-off saws
L06306- Altendorf, Omga, SCMI, Striebig
| Sku | Diameter | Teeth | Kerf | Plate | Bore | Price | Add to Cart | | L06150 | 6" |
40 ATB |
0.126" |
0.087" |
5/8" |
$113.60 |
| L06180 | 7" |
60 ATB |
0.126" |
0.087" |
5/8" |
$137.20 |
| L06200 | 8" |
60 ATB |
0.126" |
0.087" |
5/8" |
$137.00 |
| L06250 | 10" |
80 ATB |
0.126" |
0.087" |
5/8" |
$158.40 |
| L06306 | 300mm |
96 ATB |
3.4mm |
2.4mm |
30mm |
$210.75 |
| L06300 | 12" |
100 ATB |
0.135" |
0.095" |
1" |
$206.85 |
| L06350 | 14" |
100 ATB |
0.150" |
0.110" |
1" |
$246.90 |
| L06400 | 16" |
120 ATB |
0.160" |
0.118" |
1" |
$321.60 |
| L06450 | 18" |
120 ATB |
0.180" |
0.134" |
1" |
$392.15 |
| 
Click To Enlarge | |
| 20. Fine Cross Cut Saw Blades - L10 | L10 |
Design:
-Tooth configuration: TCG
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For fine sizing cuts in single or double sided melamine panels, MDF, OSB and HDF panels
-On table saws, sliding table saws and vertical panel sizing saws
L10306- Altendorf, Omga, SCMI, Striebig
L10220-H- Holz-Her
| Sku | Diameter | Teeth | Kerf | Plate | Bore | Price | Add to Cart | | L10150 | 6" |
40 TCG |
0.126" |
0.087" |
5/8" |
$123.70 |
| L10180 | 7" |
60 TCG |
0.126" |
0.087" |
5/8" |
$146.90 |
| L10200 | 8" |
60 TCG |
0.126" |
0.087" |
5/8" |
$145.60 |
| L10220-H | 220mm |
64 TCG |
3.2mm |
2.2mm |
30mm |
$166.85 |
| L10250 | 10" |
80 TCG |
0.126" |
0.087" |
5/8" |
$164.60 |
| L10254 | 10" |
80 TCG |
4.0mm |
0.087" |
5/8" |
$254.80 |
| L10251 | 10" |
100 TCG |
0.126" |
0.087" |
5/8" |
$204.25 |
| L10306 | 300mm |
100 TCG |
3.4mm |
2.4mm |
30mm |
$216.00 |
| L10300 | 12" |
100 TCG |
0.135" |
0.095" |
1" |
$212.60 |
| L10350 | 14" |
100 TCG |
0.150" |
0.110" |
1" |
$255.40 |
| L10400 | 16" |
120 TCG |
0.160" |
0.118" |
1" |
$340.75 |
| L10450 | 18" |
120 TCG |
0.180" |
0.134" |
1" |
$419.15 |
| 
Click To Enlarge | |
| 21. Fine Cross Cut Saw Blades For Plastic - L01 | L01 |
Design:
-Tooth configuration: TC2
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For fine sizing cuts in single or double laminated panels, plexiglass and solid surface materials such as Wilsonart Gibraltar, SSV; Corian; Surell; Avonite; Fountainhead, etc.
-On table saws, sliding table saws, radial arm saws and vertical panel sizing saws
-"Non-Melt" saw blades see LNM series
| Sku | Diameter | Teeth | Kerf | Plate | Bore | Price | Add to Cart | | L01200 | 8" |
60 TC2 |
0.126" |
0.087" |
5/8" |
$143.55 |
| L01250 | 10" |
80 TC2 |
0.126" |
0.087" |
5/8" |
$187.20 |
| L01300 | 12" |
100 TC2 |
0.135" |
0.095" |
1" |
$236.70 |
| L01350 | 14" |
100 TC2 |
0.158" |
0.118" |
1" |
$272.20 |
| L01400 | 16" |
120 TC2 |
0.160" |
0.118" |
1" |
$374.60 |
| L01450 | 18" |
120 TC2 |
0.180" |
0.134" |
1" |
$469.60 |
| 
Click To Enlarge | |
| 22. Fine Cross Cut Saw Blades For Plastic - L01 | L01 |
Design:
-Tooth configuration: TC2
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For fine sizing cuts in single or double laminated panels, plexiglass and solid surface materials such as Wilsonart Gibraltar, SSV; Corian; Surell; Avonite; Fountainhead, etc.
-On table saws, sliding table saws, radial arm saws and vertical panel sizing saws
-"Non-Melt" saw blades see LNM series
| Sku | Diameter | Teeth | Kerf | Plate | Bore | Price | Add to Cart | | L01200 | 8" |
60 TC2 |
0.126" |
0.087" |
5/8" |
$143.55 |
| L01250 | 10" |
80 TC2 |
0.126" |
0.087" |
5/8" |
$187.20 |
| L01300 | 12" |
100 TC2 |
0.135" |
0.095" |
1" |
$236.70 |
| L01350 | 14" |
100 TC2 |
0.158" |
0.118" |
1" |
$272.20 |
| L01400 | 16" |
120 TC2 |
0.160" |
0.118" |
1" |
$374.60 |
| L01450 | 18" |
120 TC2 |
0.180" |
0.134" |
1" |
$469.60 |
|
Click To Enlarge | |
| 23. Mitre Joint Saw Blades | LM4/LM6 |
Design:
-Tooth configuration: 4 ATB and 1 raker
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For mitre joint cuts in soft and hardwoods, painted mouldings, gesso and other high-gloss and pre-finished picture frames and furniture mouldings as well as PVC substrates
-For aluminum cuts see L1A, L1B, L1C series
-On single or double cut-off mitre machines and radial arm saws
| Sku | Diameter | Kerf | Plate | Bore | Teeth | Machine/Misc.... | Price | Add to Cart | | LM6200 | 8" |
.112" |
.087" |
5/8" |
60 |
|
$148.20 |
| LM4216 | 8-1/2" |
.110" |
.071" |
5/8" |
24 |
Elu, Hitachi 10 deg. ATB grind |
$84.25 |
| LM6216 | 8-1/2" |
.110" |
.071" |
5/8" |
48 |
Elu, Hitachi 10 deg. ATB grind |
$127.50 |
| LM4225 | 9" |
.112" |
.087" |
5/8" |
60 |
|
$169.55 |
| LM6225 | 9" |
.112" |
.087" |
5/8" |
72 |
Grind: 8 ATB & 1 Raker |
$169.10 |
| LM4250 | 10" |
.116" |
.087" |
5/8" |
60 |
|
$149.60 |
| LM6250 | 10" |
.112" |
.087" |
5/8" |
80 |
|
$169.10 |
| LM4300 | 12" |
.122" |
.095" |
1" |
80 |
|
$200.50 |
| LM4308 | 12" |
.122" |
.110" |
5/8" |
80 |
Pistorius, CTD |
$220.35 |
| LM6300 | 12" |
.120" |
.095" |
1" |
100 |
|
$221.20 |
| LM6308 | 12" |
.134" |
.110" |
5/8" |
100 |
Pistorius, CTD |
$244.00 |
| LM6330 | 330mm |
3.3mm |
2.5mm |
20mm |
100 |
Wegoma, Haffner, Salvarani |
$278.20 |
| LM6351 | 350mm |
3.1mm |
2.5mm |
25mm |
100 |
Makita (with 25mm arbor) |
$260.05 |
| LM6350 | 14." |
.142" |
.118" |
1" |
100 |
|
$256.25 |
| LM6350-32 | 355mm |
3.6mm |
3.0mm |
32mm |
100 |
Brevetti (355 Diam.) |
$281.70 |
| LM6353 | 350mm |
3.2mm |
2.6mm |
32mm |
108 |
Brevetti |
$273.85 |
| LM6358 | 14" |
.150" |
.118" |
5/8" |
100 |
Pistorius, CTD |
$281.50 |
| LM6380 | 15" |
.120" |
.098" |
1" |
100 |
Hitachi |
$268.45 |
| 
Click For More | |
| 24. Chip Free Melamine Trim Blades - LM630° | LM6-30 |
Design:
-Tooth configuration: High ATB (30 degrees)
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For Chip-free sizing cuts (on both sides) in melamine and wood veneered panels, without the need for pre-scoring
-For fine cross cuts in solid woods
-On table saws, sliding table saws, vertical panel sizing saws and cut-off saws
LM6031-30- Altendorf, Striebig
LM6221-H- Holz-Her
| Sku | Diameter | Teeth | Kerf | Plate | Bore | Price | Add to Cart | | LM6201 | 8" |
60 High 30° ATB |
0.118" |
0.087" |
5/8" |
$155.70 |
| LM6221-H | 220mm |
64 High 30° ATB |
3.2mm |
2.4mm |
30mm |
$189.40 |
| LM6251 | 10" |
80 High 30° ATB |
0.118" |
0.087" |
5/8" |
$187.20 |
| LM6301-30 | 300mm |
100 High 30° ATB |
3.2mm |
2.4mm |
30mm |
$246.80 |
| LM6301 | 12" |
100 High 30° ATB |
0.126" |
0.095" |
1" |
$232.10 |
| LM6352 | 14" |
100 High 30° ATB |
0.150" |
0.118" |
1" |
$260.05 |
| LM6401 | 16" |
120 High 30° ATB |
0.157" |
0.118" |
1" |
$368.25 |
| 
Click To Enlarge | |
| 25. Thin Kerf Saw Blades - L05 | L05 |
Design:
-Tooth configuration: refer to chart below (grind)
-Cutting material: TC
-Expansion slots: Cu plugged
-Very stable body minimizes run-out
Application:
-For fine cross cuts in veneered panels, expensive woods and sheets, thin plexiglass, masonite and plastics
-On table saws, sliding table saws and vertical panel sizing saws
L04302- Altendorf, Omga, SCMI, Striebig
| Sku | Diameter | Teeth | Kerf | Bore | Grind | Price | Add to Cart | | L05150 | 6" |
48 ATB |
0.080" |
5/8" |
ATB |
$165.85 |
| L05180 | 7" |
56 ATB |
0.080" |
5/8" |
ATB |
$172.35 |
| L05200 | 8" |
64 ATB |
0.080" |
5/8" |
ATB |
$191.80 |
| L05201 | 8" |
64 TCG |
0.080" |
5/8" |
TCG |
$196.25 |
| L05250 | 10" |
80 ATB |
0.083" |
5/8" |
ATB |
$217.45 |
| L05251 | 10" |
100 ATB |
0.087" |
5/8" |
ATB |
$238.60 |
| L05252 | 10" |
80 TCG |
0.083" |
5/8" |
TCG |
$217.70 |
| L05300 | 12" |
96 ATB |
0.087" |
1" |
ATB |
$259.55 |
| L05302 | 12" |
96 TCG |
0.087" |
1" |
TCG |
$264.90 |
| L05350 | 14" |
108 ATB |
0.095" |
1" |
ATB |
$328.60 |
| L05400 | 16" |
120 ATB |
0.110" |
1" |
ATB |
$395.55 |
| 
Click To Enlarge | |
| 26. Thin Kerf Saw Blades - L05 | L05 |
Design:
-Tooth configuration: refer to chart below (grind)
-Cutting material: TC
-Expansion slots: Cu plugged
-Very stable body minimizes run-out
Application:
-For fine cross cuts in veneered panels, expensive woods and sheets, thin plexiglass, masonite and plastics
-On table saws, sliding table saws and vertical panel sizing saws
L04302- Altendorf, Omga, SCMI, Striebig
| Sku | Diameter | Teeth | Kerf | Bore | Grind | Price | Add to Cart | | L05150 | 6" |
48 ATB |
0.080" |
5/8" |
ATB |
$165.85 |
| L05180 | 7" |
56 ATB |
0.080" |
5/8" |
ATB |
$172.35 |
| L05200 | 8" |
64 ATB |
0.080" |
5/8" |
ATB |
$191.80 |
| L05201 | 8" |
64 TCG |
0.080" |
5/8" |
TCG |
$196.25 |
| L05250 | 10" |
80 ATB |
0.083" |
5/8" |
ATB |
$217.45 |
| L05251 | 10" |
100 ATB |
0.087" |
5/8" |
ATB |
$238.60 |
| L05252 | 10" |
80 TCG |
0.083" |
5/8" |
TCG |
$217.70 |
| L05300 | 12" |
96 ATB |
0.087" |
1" |
ATB |
$259.55 |
| L05302 | 12" |
96 TCG |
0.087" |
1" |
TCG |
$264.90 |
| L05350 | 14" |
108 ATB |
0.095" |
1" |
ATB |
$328.60 |
| L05400 | 16" |
120 ATB |
0.110" |
1" |
ATB |
$395.55 |
|
Click To Enlarge | |
| 27. Thin Rim Saw Blades - L15 | L15 |
Design:
-Tooth configuration: ATB
-Cutting material: TC
-Expansion slots: Cu plugged
-Thin rimmed body (on left side) allows for thin kerf at teeth and stability during cutting operation
Application:
-For fine cross cuts in veneered panels, expensive woods and sheets, thin plexiglass, masonite and plastics
-On table saws and sliding table saws
Collar width 2"
| Sku | Diameter | Teeth | Collar Width | Kerf | Plate | Bore | Price | Add to Cart | | L15200 | 8" |
60 ATB |
2" |
0.092" |
0.095" |
5/8" |
$226.20 |
| L15225 | 9" |
60 ATB |
2" |
0.092" |
0.095" |
5/8" |
$255.40 |
| L15250 | 10" |
80 ATB |
2" |
0.092" |
0.095" |
5/8" |
$262.60 |
| L15300 | 12" |
100 ATB |
2" |
0.092" |
0.095" |
1" |
$373.10 |
| 
Click To Enlarge | |
| 28. Thin Rim Saw Blades - L15 | L15 |
Design:
-Tooth configuration: ATB
-Cutting material: TC
-Expansion slots: Cu plugged
-Thin rimmed body (on left side) allows for thin kerf at teeth and stability during cutting operation
Application:
-For fine cross cuts in veneered panels, expensive woods and sheets, thin plexiglass, masonite and plastics
-On table saws and sliding table saws
Collar width 2"
| Sku | Diameter | Teeth | Collar Width | Kerf | Plate | Bore | Price | Add to Cart | | L15200 | 8" |
60 ATB |
2" |
0.092" |
0.095" |
5/8" |
$226.20 |
| L15225 | 9" |
60 ATB |
2" |
0.092" |
0.095" |
5/8" |
$255.40 |
| L15250 | 10" |
80 ATB |
2" |
0.092" |
0.095" |
5/8" |
$262.60 |
| L15300 | 12" |
100 ATB |
2" |
0.092" |
0.095" |
1" |
$373.10 |
|
Click To Enlarge | |
| 29. Thin Rim Saw Blades - L16 | L16 |
Design:
-Tooth configuration: TC2
-Cutting material: TC
-Expansion slots: Cu plugged
-Thin rimmed body (on left side) allows for thin kerf at teeth and stability during cutting operation
Application:
-For fine cross cuts in acrylic sheets, thin plexiglass, masonite and plastics
-On table saws and sliding table saws
Collar width 2"
| Sku | Diameter | Teeth | Collar Width | Kerf | Plate | Bore | Price | Add to Cart | | L16200 | 8" |
60 TC2 |
2" |
0.092" |
0.095" |
5/8" |
$228.70 |
| L16225 | 9" |
60 TC2 |
2" |
0.092" |
0.095" |
5/8" |
$255.20 |
| L16250 | 10" |
80 TC2 |
2" |
0.092" |
0.095" |
5/8" |
$272.60 |
| L16300 | 12" |
100 TC2 |
2" |
0.092" |
0.095" |
1" |
$322.75 |
| 
Click To Enlarge | |
| 30. Thin Rim Saw Blades - L16 | L16 |
Design:
-Tooth configuration: TC2
-Cutting material: TC
-Expansion slots: Cu plugged
-Thin rimmed body (on left side) allows for thin kerf at teeth and stability during cutting operation
Application:
-For fine cross cuts in acrylic sheets, thin plexiglass, masonite and plastics
-On table saws and sliding table saws
Collar width 2"
| Sku | Diameter | Teeth | Collar Width | Kerf | Plate | Bore | Price | Add to Cart | | L16200 | 8" |
60 TC2 |
2" |
0.092" |
0.095" |
5/8" |
$228.70 |
| L16225 | 9" |
60 TC2 |
2" |
0.092" |
0.095" |
5/8" |
$255.20 |
| L16250 | 10" |
80 TC2 |
2" |
0.092" |
0.095" |
5/8" |
$272.60 |
| L16300 | 12" |
100 TC2 |
2" |
0.092" |
0.095" |
1" |
$322.75 |
|
Click To Enlarge | |
| 31. Non-Melt Saw Blades - LNM | LNM |
Design:
-Tooth configuration: TC2
-Tooth geometry specifically designed to minimize "melting" of material
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For "non-melt" fine cross cuts in acrylic sheets, selrins, ABS (cycolac), Styrenes and PVC
-On table saws, sliding table saws and vertical panel sizing saws
LNM220- Holz-Her
| Sku | Diameter | Teeth | Kerf | Plate | Bore | Price | Add to Cart | | LNM200 | 8" |
60 TC2 |
0.100" |
0.071" |
5/8" |
$143.55 |
| LNM220 | 220mm |
64 TC2 |
3.2mm |
2.4mm |
30mm |
$189.40 |
| LNM250A | 10" |
60 TC2 |
0.118" |
0.087" |
5/8" |
$155.95 |
| LNM250 | 10" |
80 TC2 |
0.100" |
0.071" |
5/8" |
$202.00 |
| LNM300A | 12" |
80 TC2 |
0.125" |
0.095" |
1" |
$203.55 |
| LNM300 | 12" |
100 TC2 |
0.125" |
0.095" |
1" |
$247.75 |
| LNM350A | 14" |
90 TC2 |
0.145" |
0.118" |
1" |
$273.10 |
| LNM350 | 14" |
100 TC2 |
0.145" |
0.118" |
1" |
$298.10 |
| 
Click To Enlarge | |
| 32. Hollow Face Saw Blades - L41 | L41 |
Diameter 350mm
For fine cross cuts in veneered panels, expensive woods and sheets, thin plexiglass, masonite, and plastics.
For use on table saws and sliding table saws.
| Sku | Teeth | Kerf | Plate | Bore | Diameter | Price | Add to Cart | | L41200 | 48 TCH |
2.9mm |
2.0mm |
5/8" |
200mm |
$177.55 |
| L41250 | 60 TCH |
2.9mm |
2.0mm |
5/8" |
250mm |
$203.85 |
| L41300 | 72 TCH |
2.9mm |
2.0mm |
1" |
300mm |
$253.75 |
| L41350 | 84 TCH |
2.9mm |
2.0mm |
1" |
350mm |
$294.20 |
| 
Click To Enlarge | |
| 33. Hollow Face Saw Blades - L42 | L42 |
Design:
-Tooth configuration: inverted "V" (face hollow-ground)
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For exceptionally smooth cuts (on both sides) in melamine and other laminated panels, without the need for pre-scoring
-For mitre cuts in wrapped styrene picture frames
-On table saws, sliding table saws, vertical panel sizing saws and mitre saws
L42220-H, L42251- Holz-Her
L42300-58- Pistorius
| Sku | Diameter | Teeth | Kerf | Plate | Bore | Price | Add to Cart | | L42220-H | 220mm |
42 Inverted "V" |
3.2mm |
2.2mm |
30mm |
$187.65 |
| L42250 | 250mm |
48 Inverted "V" |
3.2mm |
2.2mm |
5/8" |
$196.15 |
| L42251 | 250mm |
48 Inverted "V" |
3.2mm |
2.2mm |
30mm |
$196.15 |
| L42300-58 | 300mm |
60 Inverted "V" |
3.2mm |
2.2mm |
5/8" |
$269.50 |
| L42300 | 300mm |
60 Inverted "V" |
3.2mm |
2.2mm |
1" |
$241.50 |
| L42350 | 350mm |
72 Inverted "V" |
3.2mm |
2.2mm |
1" |
$290.90 |
| 
Click To Enlarge | |
| 34. Double Cut Off Saw Blades - L4D | L4D/L6D |
Design:
-Tooth configuration: 3 beveled on side and 1 beveled opposite side. Supplied in pairs 1 LH and 1 RH (order separately)
-Cutting material: TC
-Extra heavy plate provides added stability
-Expansion slots: Cu plugged
Application:
-For fine cut-off and mitre cuts of soft and hardwoods, and trimming of plywood, wood veneered and plastic laminated panels (single sided), or (double sided) using a pre-scoring unit
-On double cut-off machines and single or double end tenoners
| Sku | Diameter | Teeth | Kerf | Plate | Bore | Price | Add to Cart | | L4D300-LH | 12" |
80 (3 Beveled one side + 1 Beveled opposite side) |
0.160" |
0.118" |
1" |
$247.85 |
| L4D300-RH | 12" |
80 (3 Beveled one side + 1 Beveled opposite side) |
0.160" |
0.118" |
1" |
$247.85 |
| L4D350-LH | 14" |
80 (3 Beveled one side + 1 Beveled opposite side) |
0.180" |
0.134" |
1" |
$293.15 |
| L4D350-RH | 14" |
80 (3 Beveled one side + 1 Beveled opposite side) |
0.180" |
0.134" |
1" |
$293.15 |
| L6D350-LH | 14" |
100 (3 Beveled one side + 1 Beveled opposite side) |
0.180" |
0.134" |
1" |
$331.35 |
| L6D350-RH | 14" |
100 (3 Beveled one side + 1 Beveled opposite side) |
0.180" |
0.134" |
1" |
$331.35 |
| L6D400-LH | 16" |
100 (3 Beveled one side + 1 Beveled opposite side) |
0.180" |
0.134" |
1" |
$360.35 |
| L6D400-RH | 16" |
100 (3 Beveled one side + 1 Beveled opposite side) |
0.180" |
0.134" |
1" |
$360.35 |
| 
Click To Enlarge | |
| 35. Conic Scoring Saw Blades - 527 | 527 |
Design:
-Tooth configuration: Conic
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For pre-scoring in plastic laminated sheets
-On table saws and sliding table saws with pre-soring units
| Sku | Diameter | Teeth | Kerf | Plate | Bore | Main Saw Diameter | Price | Add to Cart | | 52705401 | 54mm |
14 Conic |
2.85mm / 3.6mm |
2.0mm |
1" |
For Modulus 2000 |
$59.20 |
| 52708001 | 80mm |
20 Conic |
3.1mm / 4.1mm |
2.2mm |
20mm |
For 10" Main |
$125.95 |
| 52710000 | 100mm |
24 Conic |
3.1mm / 4.1mm |
2.4mm |
1" |
For 10" Main |
$125.95 |
| 52710001 | 100mm |
24 Conic |
3.4mm / 4.4mm |
2.4mm |
20mm |
For 12" Main |
$125.95 |
| 52710002 | 100mm |
24 Conic |
3.8mm / 4.8mm |
2.8mm |
20mm |
For 14-16" Main |
$125.95 |
| 52711001 | 110mm |
24 Conic |
3.4mm / 4.4mm |
2.4mm |
20mm |
For 12" Main |
$125.95 |
| 52711002 | 110mm |
24 Conic |
3.8mm / 4.8mm |
2.8mm |
20mm |
For 14-16" Main |
$125.95 |
| 52711501 | 115mm |
24 Conic |
3.4mm / 4.4mm |
2.4mm |
20mm |
For 12" Main |
$125.95 |
| 52711502 | 115mm |
24 Conic |
3.4mm / 4.4mm |
2.4mm |
20mm |
For 14"-16" Main |
$125.95 |
| 52712001 | 120mm |
24 Conic |
3.4mm / 4.4mm |
2.4mm |
20mm |
For 12" Main |
$129.80 |
| 52712001-34 | 120mm |
24 Conic |
3.4mm / 4.4mm |
2.4mm |
3/4" |
For 12" Main |
$129.80 |
| 52712002 | 120mm |
24 Conic |
3.8mm / 4.8mm |
2.8mm |
20mm |
For 14-16" Main |
$129.80 |
| 52712002-34 | 120mm |
24 Conic |
3.8mm / 4.8mm |
2.8mm |
3/4" |
For 14"-16" Main |
$129.80 |
| 52712501 | 125mm |
24 Conic |
3.4mm / 4.4mm |
2.4mm |
20mm |
For 12" Main |
$129.80 |
| 52712501-34 | 125mm |
24 Conic |
3.4mm / 4.4mm |
2.4mm |
3/4" |
For 12" Main |
$129.80 |
| 52712501-22 | 125mm |
24 Conic |
3.4mm / 4.4mm |
2.4mm |
22mm |
For 12" Main |
$129.80 |
| 52712502 | 125mm |
24 Conic |
3.8mm / 4.8mm |
2.8mm |
20mm |
For 14"-16" Main |
$129.80 |
| 52715001 | 150mm |
24 Conic |
3.4mm / 4.4mm |
2.4mm |
20mm |
For 12" Main |
$153.85 |
| 52715002 | 150mm |
24 Conic |
3.8mm / 4.8mm |
3.0mm |
20mm |
For 14"-16" Main |
$153.85 |
| 
Click To Enlarge | |
| 36. Split Scoring Saw Blades - 528 | 528 |
Design:
-Tooth configuration: Flat Top
-Cutting material: TC
-Two piece unit adjustable to the kerf of the main saw blade with the use of shims
Application:
-For pre-scoring in plastic laminated sheets
-On table saws, sliding table saws and panel sizing saws with controllable pre-soring units
52812001-50- 50mm bore, 4 pin-holes counter-sunk, no shims. For Altendorf with quick adjustable flange
| Sku | Diameter | Teeth | Kerf | Plate | Bore | Machine | Price | Add to Cart | | 528080001-20 | 80mm |
2 x 10 Flat Top |
2.8mm / 3.6mm |
2.0mm |
20mm |
EMA Casadei, Minimax |
$154.20 |
| 52810001-34 | 100mm |
2 x 12 Flat Top |
2.8mm / 3.6mm |
2.0mm |
3/4" |
SCMI, Delta |
$154.20 |
| 52810001-20 | 100mm |
2 x 12 Flat Top |
2.8mm / 3.6mm |
2.0mm |
20mm |
Schelling |
$154.20 |
| 52810001-22 | 100mm |
2 x 12 Flat Top |
2.8mm / 3.6mm |
2.0mm |
22mm |
Altendorf, Martin, Panhans |
$154.20 |
| 52810001-1 | 100mm |
2 x 12 Flat Top |
2.8mm / 3.6mm |
2.0mm |
1" |
SCMI, Delta |
$154.20 |
| 52810501-20 | 105mm |
2 x 12 Flat Top |
2.8mm / 3.6mm |
2.0mm |
20mm |
Wadkin-CP320 |
$161.95 |
| 52812001-34 | 120mm |
2 x 12 Flat Top |
2.8mm / 3.6mm |
2.0mm |
3/4" |
SCMI |
$159.65 |
| 52812001-20 | 120mm |
2 x 12 Flat Top |
2.8mm / 3.6mm |
2.0mm |
20mm |
SCM, Holz-Her |
$159.65 |
| 52812001-22 | 120mm |
2 x 12 Flat Top |
2.8mm / 3.6mm |
2.0mm |
22mm |
Altendorf, Martin, Panhans |
$159.65 |
| 52812001-50 | 120mm |
2 x 12 Flat Top |
2.8mm / 3.6mm |
2.2mm |
50mm |
Altendorf |
$180.35 |
| 52812501-22 | 125mm |
2 x 20 Flat Top |
2.8mm / 3.6mm |
2.0mm |
22mm |
Holz-Her |
$164.70 |
| 52812501 | 125mm |
2 x 20 Flat Top |
2.8mm / 3.6mm |
2.0mm |
30mm |
Steton |
$182.10 |
| 52815001-45 | 150mm |
2 x 20 Flat Top |
3.9mm / 5.2mm |
2.2mm |
45mm |
|
$290.15 |
| 52817501 | 175mm |
2 x 20 Flat Top |
4.4mm / 5.0mm |
2.0mm |
45mm |
Holzma |
$286.30 |
| 52818001-30 | 180mm |
2 x 18 Flat Top |
4.4mm / 5.0mm |
2.0mm |
30mm |
Koelle |
$286.30 |
| 52818001 | 180mm |
2 x 20 Flat Top |
4.4mm / 5.2mm |
2.0mm |
45mm |
Holzma |
$276.55 |
| 52818002 | 180mm |
2 x 20 Flat Top |
4.8mm / 5.4mm |
2.0mm |
45mm |
Holzma |
$338.15 |
| 52822001 | 220mm |
2 x 24 Flat Top |
4.4mm / 5.6mm |
2.4mm |
45mm |
Holzma(postforming) |
$320.70 |
| 52829001 | 290mm |
2 x 24 Flat Top |
4.4mm / 5.6mm |
3.5mm |
45mm |
Holzma(postforming) |
$386.70 |
| 52832001 | 320mm |
2 x 24 Flat Top |
4.4mm / 5.6mm |
3.5mm |
45mm |
Holzma(postforming) |
$386.70 |
| 52834001 | 340mm |
2 x 24 Flat Top |
4.4mm / 5.6mm |
3.5mm |
45mm |
Holzma(postforming) |
$503.30 |
| 
Click To Enlarge | |
| 37. Left Hand Scoring Saw Blades - 529 | 529 |
Design:
-Tooth configuration: Unilaterally right
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For pre-scoring in solid wood, veneered and plastic laminated sheets
-On single or double end tenoners with pre-scoring units, in combination with hogging units
Bore size modified according to flange or spindle size of machine
| Sku | Diameter | Teeth | Kerf | Plate | Bore | Price | Add to Cart | | 529150 | 6" |
30 Unilaterally Right |
0.126" |
0.087" |
5/8" |
$131.95 |
| 529154 | 6" |
40 Unilaterally Right |
0.126" |
0.087" |
5/8" |
$140.20 |
| 529180 | 7" |
30 Unilaterally Right |
0.126" |
0.087" |
5/8" |
$131.95 |
| 529184 | 7" |
40 Unilaterally Right |
0.126" |
0.087" |
5/8" |
$144.65 |
| 529186 | 7" |
60 Unilaterally Right |
0.126" |
0.087" |
5/8" |
$176.05 |
| 529200 | 8" |
40 Unilaterally Right |
0.126" |
0.087" |
5/8" |
$137.95 |
| 529206 | 8" |
60 Unilaterally Right |
0.126" |
0.087" |
5/8" |
$192.00 |
| 
Click To Enlarge | |
| 38. Right Hand Scoring Saw Blades - 530 | 530 |
Design:
-Tooth configuration: Unilaterally left
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For pre-scoring in solid wood, veneered and plastic laminated sheets
-On single or double end tenoners with pre-scoring units, in combination with hogging units
Bore size modified according to flange or spindle size of machine
| Sku | Diameter | Teeth | Kerf | Plate | Bore | Price | Add to Cart | | 530150 | 6" |
30 Unilaterally Left |
0.126" |
0.087" |
5/8" |
$131.95 |
| 530154 | 6" |
40 Unilaterally Left |
0.126" |
0.087" |
5/8" |
$140.20 |
| 530180 | 7" |
30 Unilaterally Left |
0.126" |
0.087" |
5/8" |
$131.95 |
| 530184 | 7" |
40 Unilaterally Left |
0.126" |
0.087" |
5/8" |
$144.65 |
| 530186 | 7" |
60 Unilaterally Left |
0.126" |
0.087" |
5/8" |
$176.05 |
| 530200 | 8" |
40 Unilaterally Left |
0.126" |
0.087" |
5/8" |
$137.95 |
| 530206 | 8" |
60 Unilaterally Left |
0.126" |
0.087" |
5/8" |
$192.00 |
| 
Click To Enlarge | |
| 39. Flat Top Scoring Saw Blades - 531 | 531 |
Design:
-Tooth configuration: Flat Top
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For pre-scoring in plastic laminated sheets
-On single or double end tenoners with pre-scoring units, in combination with hogging units
Bore size modified according to flange or spindle size of machine
| Sku | Diameter | Teeth | Kerf | Plate | Bore | Price | Add to Cart | | 531150 | 6" |
30 Flat Top |
0.126" |
0.087" |
5/8" |
$131.95 |
| 531154 | 6" |
40 Flat Top |
0.126" |
0.087" |
5/8" |
$140.20 |
| 531180 | 7" |
30 Flat Top |
0.126" |
0.087" |
5/8" |
$131.95 |
| 531184 | 7" |
40 Flat Top |
0.126" |
0.087" |
5/8" |
$144.65 |
| 531186 | 7" |
60 Flat Top |
0.126" |
0.087" |
5/8" |
$176.05 |
| 531200 | 8" |
40 Flat Top |
0.126" |
0.087" |
5/8" |
$137.95 |
| 531206 | 8" |
60 Flat Top |
0.126" |
0.087" |
5/8" |
$192.00 |
| 
Click To Enlarge | |
| 40. Edge Banding Saw Blades - 560 | 560 |
Design:
-Tooth configuration: see chart below (tooth shape & Hook angle)
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For trimming projecting edge bandings of solid wood, wood veneer and plastics
-On single and double-sided edge-banding machines
| Sku | Diameter | Kerf | Bore | Plate | Tooth Shape & Hook Angle | Price | Add to Cart | | 560 090 A | 90mm |
3.0mm |
30mm |
2.0mm |
Alt. Bev. Positive |
$107.10 |
| 560 100 L | 100mm |
3.0mm |
32mm |
2.0mm |
One Side Positive |
$111.20 |
| 560 100 R | 100mm |
3.0mm |
32mm |
2.0mm |
One Side Positive |
$111.20 |
| 560 101 L | 100mm |
3.0mm |
32mm |
2.0mm |
One Side Negative |
$111.20 |
| 560 101 R | 100mm |
3.0mm |
32mm |
2.0mm |
One Side Negative |
$111.20 |
| 560 100 A | 100mm |
3.6mm |
32mm |
2.6mm |
Alt. Bev. Positive |
$115.30 |
| 560 100 A-22 | 100mm |
3.6mm |
22mm |
2.6mm |
Alt. Bev. Positive |
$115.30 |
| 560 194 L | 100mm / 94mm |
3.6mm |
32mm |
2.5mm |
Trimming-Bev. Set/One Side Bev. Neg. |
$253.50 |
| 560 194 R | 100mm / 94mm |
3.6mm |
32mm |
2.5mm |
Trimming-Bev. Set/One Side Bev. Neg. |
$253.50 |
| 560 110 A | 110mm |
3.6mm |
32mm |
2.6mm |
Alt. Bev. Positive |
$126.60 |
| 560 110 A-22 | 110mm |
3.6mm |
22mm |
2.6mm |
Alt. Bev. Positive |
$119.00 |
| 560 120 A | 120mm |
3.2mm |
20mm |
2.2mm |
Alt. Bev. Positive |
$124.50 |
| 560 125 L | 125mm |
3.2mm |
20mm |
2.2mm |
One Side Positive |
$119.20 |
| 560 125 R | 125mm |
3.2mm |
20mm |
2.2mm |
One Side Positive |
$119.20 |
| 560 150 L | 150mm |
3.5mm |
22mm |
2.3mm |
One Side Positive |
$149.80 |
| 560 150 R | 150mm |
3.5mm |
22mm |
2.3mm |
One Side Positive |
$149.80 |
| 560 151 L | 150mm |
3.5mm |
22mm |
2.3mm |
One Side Negative |
$149.80 |
| 560 151 R | 150mm |
3.5mm |
22mm |
2.3mm |
One Side Negative |
$149.80 |
| 560 154 L | 150mm |
3.5mm |
20mm |
2.3mm |
One Side Positive |
$179.90 |
| 560 154 R | 150mm |
3.5mm |
20mm |
2.3mm |
One Side Positive |
$179.90 |
| 560 150 A | 150mm |
3.5mm |
22mm |
2.3mm |
Alt. Bev. Positive |
$191.30 |
| 560 160 A | 160mm |
2.8mm |
30mm |
2.0mm |
Alt. Bev. Positive |
$111.80 |
| 560 160 B | 160mm |
3.2mm |
20mm |
2.2mm |
Alt. Bev. Positive |
$151.00 |
| 570 170 L | 170mm |
3.2mm |
20mm |
2.2mm |
One Side Positive |
$142.70 |
| 570 170 R | 170mm |
3.2mm |
20mm |
2.2mm |
One Side Positive |
$142.70 |
| 570 170 L-30 | 170mm |
3.2mm |
30mm |
2.2mm |
One Side Positive |
$142.70 |
| 570 170 R-30 | 170mm |
3.2mm |
30mm |
2.2mm |
One Side Positive |
$142.70 |
| 
Click To Enlarge | |
| 41. Saw Blades For Non-Ferrous Metals - L1A | L1A |
Design:
-Tooth configuration: TCG
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For splitting and mitre jointing non-ferrous extrusions, sheets and light bars
-On mitre joint, splitting, trimming, double cross-cutting and sizing machines
-Material to be cut must be clamped firmly
-Use of spray lubrication recommended
| Sku | Diameter | Kerf | Plate | Bore | Teeth | Price | Add to Cart | | L1A180 | 7" |
0.112" |
0.087" |
5/8" |
44 |
$122.65 |
| L1A200 | 8" |
0.112" |
0.087" |
5/8" |
48 |
$131.15 |
| L1A225 | 9" |
0.112" |
0.087" |
5/8" |
60 |
$160.05 |
| L1A250 | 10" |
0.112" |
0.087" |
5/8" |
60 |
$153.15 |
| L1A252 | 7" |
0.126" |
0.102" |
5/8" |
60 |
$168.75 |
| L1A308 | 12" |
0.124" |
0.110" |
5/8" |
80 |
$222.60 |
| L1A300 | 12" |
0.122" |
0.095" |
1" |
80 |
$200.60 |
| L1A350 | 14" |
0.145" |
0.118" |
1" |
90 |
$257.25 |
| L1A400 | 16" |
0.145" |
0.118" |
1" |
100 |
$306.30 |
| L1A450 | 18" |
0.174" |
0.134" |
1" |
100 |
$378.15 |
| L1A500 | 20" |
0.174" |
0.134" |
1" |
100 |
$451.25 |
| 
Click To Enlarge | |
| 42. Saw Blades For Non-Ferrous Metals - L1C | L1C |
Design:
-Tooth configuration: TCG
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For splitting and mitre jointing non-ferrous extrusions, thin sheets and light non-ferrous bars
-On mitre joint, splitting, trimming, double cross-cutting and sizing machines
-Material to be cut must be clamped firmly
-Use of spray lubrication recommended
| Sku | Diameter | Kerf | Plate | Bore | Teeth | Price | Add to Cart | | L1C250 | 10" |
0.118" |
0.095" |
5/8" |
72 |
$214.75 |
| L1C300 | 12" |
0.126" |
0.102" |
1" |
90 |
$288.80 |
| L1C308 | 12" |
0.126" |
0.102" |
5/8" |
90 |
$288.80 |
| 
Click To Enlarge | |
| 43. Saw Blades For Non-Ferrous Metals - L1B | L1B |
Design:
-Tooth configuration: TCG
-Cutting material: TC
-Expansion slots: Cu plugged
Application:
-For splitting and mitre jointing non-ferrous extrusions, thin sheets and light non-ferrous bars
-On mitre joint, splitting, trimming, double cross-cutting and sizing machines
-Material to be cut must be clamped firmly
-Use of spray lubrication recommended
L1B308, L1B358- Pistorius Mitre Saw
L1B351- Makita Mitre Saw (with 25mm arbor)
L1B380- Hitachi Mitre Saw
| Sku | Diameter | Kerf | Plate | Bore | Tooth Shape & Hook Angle | Price | Add to Cart | | L1B200 | 8" |
0.112" |
0.087" |
5/8" |
60 |
$146.80 |
| L1B250 | 10" |
0.112" |
0.087" |
5/8" |
80 |
$188.25 |
| L1B252 | 10" |
0.126" |
0.102" |
5/8" |
80 |
$198.00 |
| L1B251 | 10" |
0.112" |
0.087" |
5/8" |
100 |
$218.85 |
| L1B306-30 | 300mm |
3.2mm |
2.6mm |
30mm |
96 |
$242.70 |
| L1B308 | 12" |
0.134" |
0.110" |
5/8" |
100 |
$240.60 |
| L1B300 | 12" |
0.120" |
0.095" |
1" |
100 |
$221.55 |
| L1B301 | 12" |
0.126" |
0.102" |
1" |
100 |
$257.35 |
| L1B330-32 | 330mm |
3.2mm |
2.5mm |
32mm |
100 |
$291.60 |
| L1B351 | 14" |
0.122" |
0.098" |
25mm |
100 |
$271.35 |
| L1B350 | 14" |
0.145" |
0.118" |
1" |
100 |
$271.35 |
| L1B353 | 350mm |
3.3mm |
2.6mm |
32mm |
108 |
$273.85 |
| L1B358 | 14" |
0.146" |
0.118" |
5/8" |
100 |
$308.55 |
| L1B380 | 15" |
0.120" |
0.098" |
1" |
100 |
$262.45 |
| L1B400 | 16" |
0.145" |
0.118" |
1" |
120 |
$347.40 |
| L1B500 | 20" |
0.174" |
0.134" |
1" |
120 |
$454.20 |
| L1B501 | 500mm |
4.4mm |
3.8mm |
30mm |
120 |
$603.85 |
| 
Click To Enlarge | |
| 44. Standard Dado Sets - 53DL | 53DL |
Design:
-Standard set consists of two outside saws blades 1/8" kerf, on 1/4" chipper, two 1/8" chippers and one 1/16" chipper
-Cutting material: TC
Application:
-To cut grooves and dados in soft and hardwoods, plywood and veneered panels
-Groove widths adjustable from 1/4" to 13/16" maximum width in 1/16" increments. Wider grooves can be obtained by adding spare chippers
-On table saws, sliding table saws and single or double end tenoners
| Sku | Diameter | Max Width | Bore | Teeth | Price | Add to Cart | | 53DL06 | 6" |
13/16" |
5/8" |
24 |
$300.85 |
| 53DL08 | 8" |
13/16" |
5/8" |
24 |
$302.65 |
| 53DL08-1 | 8" |
13/16" |
1" |
24 |
$302.65 |
| 53DL10 | 10" |
13/16" |
5/8" |
24 |
$432.55 |
| 53DL10-1 | 10" |
13/16" |
1" |
24 |
$432.55 |
| 53DL12 | 12" |
13/16" |
1" |
24 |
$583.15 |
| 53DL14 | 14" |
13/16" |
1" |
40 |
$840.95 |
| 
Click For More | |
| 45. Standard Dado Sets - Outside Saw Blades Only 53DL | 53DL |
Design:
-Standard set consists of two outside saws blades 1/8" kerf, on 1/4" chipper, two 1/8" chippers and one 1/16" chipper
-Cutting material: TC
Application:
-To cut grooves and dados in soft and hardwoods, plywood and veneered panels
-Groove widths adjustable from 1/4" to 13/16" maximum width in 1/16" increments. Wider grooves can be obtained by adding spare chippers
-On table saws, sliding table saws and single or double end tenoners
| Sku | Diameter | Kerf | Bore | Teeth | Price | Add to Cart | | 53DL06-LH | 6" |
1/8" |
5/8" |
24 |
$79.40 |
| 53DL06-RH | 6" |
1/8" |
5/8" |
24 |
$79.40 |
| 53DL08-LH | 8" |
1/8" |
5/8" |
24 |
$87.40 |
| 53DL08-RH | 8" |
1/8" |
5/8" |
24 |
$87.40 |
| 53DL08-1-LH | 8" |
1/8" |
1" |
24 |
$107.95 |
| 53DL08-1-RH | 8" |
1/8" |
1" |
24 |
$107.95 |
| 53DL10-LH | 10" |
1/8" |
5/8" |
24 |
$124.40 |
| 53DL010-RH | 10" |
1/8" |
5/8" |
24 |
$124.40 |
| 53DL10-1-LH | 10" |
1/8" |
1" |
24 |
$153.60 |
| 53DL10-1-RH | 10" |
1/8" |
1" |
24 |
$153.60 |
| 53DL12-LH | 12" |
1/8" |
1" |
24 |
$181.20 |
| 53DL12-RH | 12" |
1/8" |
1" |
24 |
$181.20 |
| 53DL14-LH | 14" |
1/8" |
1" |
40 |
$319.35 |
| 53DL14-RH | 14" |
1/8" |
1" |
24 |
$319.35 |
|
Click For More | |
| 46. Standard Dado Sets - Spare Chippers 2-Teeth 53DL | 53DL |
Design:
-Standard set consists of two outside saws blades 1/8" kerf, on 1/4" chipper, two 1/8" chippers and one 1/16" chipper
-Cutting material: TC
Application:
-To cut grooves and dados in soft and hardwoods, plywood and veneered panels
-Groove widths adjustable from 1/4" to 13/16" maximum width in 1/16" increments. Wider grooves can be obtained by adding spare chippers
-On table saws, sliding table saws and single or double end tenoners
| Sku | Diameter | Kerf | Bore | Price | Add to Cart | | 5306-16 | 6" |
1/16" |
5/8" |
$33.90 |
| 5308-16 | 8" |
1/16" |
5/8" |
$37.00 |
| 5308-16-1 | 8" |
1/16" |
1" |
$37.00 |
| 5310-16 | 10" |
1/16" |
5/8" |
$44.85 |
| 5310-16-1 | 10" |
1/16" |
1" |
$44.85 |
| 5312-16 | 12" |
1/16" |
1" |
$59.40 |
| 5314-16 | 14" |
1/16" |
1" |
$84.70 |
| |
|
