Design:
-Tooth configuration: Flat Top
-Cutting material: TC XL4000
-Expansion slots: Cu plugged

Application:
-For ripping dry soft and hardwoods
-On table saws or gang-rip saws with one or two shafts

Design:
-Tooth configuration: TCG
-Cutting material: TC XL4000
-Expansion slots: Cu plugged

Application:
-For glue line ripping dry soft and hardwoods
-Extra smooth cut for gluing applications
-On straight line rip saws, gang rip saws and table saws

S22306-2, S22350-2- Deihl with 9/16" pin-hole
S22252, S22302-318, S22306-318, S22350-318- Mereen - Johnson
S22306-70, S22350-70- SCM with 2 keyways 20 x 5mm

Design:
-Tooth configuration: 4 ATB and 1 Raker
-Cutting material: TC XL4000
-Expansion slots: Cu plugged
-0deg hook angle reduces the tendency of the blade grabbing the material

Application:
-For cross cutting and ripping dry soft and hardwoods
-On radial arm saws and other saws where the blade is above the work piece

S07250, S07300- 2 ATB and 1 Raker

Design:
-Tooth configuration: ATB
-Cutting material: TC XL4000
-Expansion slots: Cu plugged

Application:
-For cross cutting and ripping dry soft and hardwoods, plywood, masonite and raw MDF panels
-On table saws, sliding table saws and cut-off saws

Design:
-Tooth configuration: TCG
-Cutting material: TC XL4000
-Expansion slots: Cu plugged

Application:
-For cross cutting and ripping dry soft and hardwoods, plastic laminated composite materials (single sided)
-On table saws, sliding table saws and cut-off saws

Design:
-Tooth configuration: 4 ATB and 1 raker
-Cutting material: TC XL4000
-Four ATB teeth and one raker with deep gullet allow for deeper cuts and improved chip-flow

Application:
-For cross cutting and ripping dry soft and hardwoods, plywood and particleboard
-On table saws, sliding table saws and cut-off saws

Design:
-Tooth configuration: ATB
-Cutting material: TC XL4000
-Expansion slots: Cu plugged

Application:
-For general cut-off and trimming of soft and hardwoods, plywood and composite panel materials, wood veneered (single sided), or (double sided) using a pre-scoring unit
-On table saws, sliding table saws and cut-off saws

S04302- Altendorf, Omga, SCMI, Striebig

Design:
-Tooth configuration: TCG
-Cutting material: TC XL4000
-Expansion slots: Cu plugged

Application:
-For general cut-off and trimming of plastic laminated materials (single sided), or (double sided) using a pre-scoring unit
-On table saws, sliding table saws and cut-off saws

S23302- Altendorf, Omga, SCMI, Striebig

Design:
-Tooth configuration: ATB
-Cutting material: TC XL4000
-Expansion slots: Cu plugged

Application:
-For fine cut-off and trimming of soft and hardwoods, plywood, wood veneered and plastic laminated panel materials
-On table saws, sliding table saws and cut-off saws

S06400CT- Specifically designed for cutting kitchen counter tops

Design:
-Tooth configuration: TCG
-Cutting material: TC XL4000
-Expansion slots: Cu plugged

Application:
-For fine sizing cuts in single or double sided melamine panels, MDF, OSB, and HDF panels
-On table saws, sliding table saws and vertical panel sizing saws

S10220-H - Holzer
S10400CT - Specifically designed for cutting kitchen counter tops

Design:
-Tooth configuration: High ATB (30deg)
-Cutting material: TC XL4000
-Expansion slots: Cu plugged

Application:
-For chip-free sizing cuts (on both sides) in melamine and wood veneered panels, without the need for pre-scoring
-For fine cross cuts in solid woods
-On table saws, sliding table saws, vertical panel sizing saws and cut-off saws

SM6221-H- Holz-Her
SM6301-30- Altendorf, Striebig

Design:
-Tooth configuration: 4 ATB and 1 raker
-Cutting material: TC XL4000
-Expansion slots: Cu plugged

Application:
-For Mitre joint cuts in soft and hardwoods, painted moouldings, gesso and other high-gloss and pre-finished picture frames and furniture mouldings as well as PVC substrates
-For aluminum cuts see L1A, L1b, L1C series
-On single or double cut-off mitre machines and radial arm saws

SM6308- Pistorius, CTD

Design:
-Tooth configuration: TC2
-Cutting material: TC XL4000
-Expansion slots: Cu plugged

Application:
-For fine sizing cuts in single or double laminated panels, plexiglass and solid surface materials such as Wilsonart; Gibraltar; SSV; Corian; Surell; Avonite; Fountainhead, etc.
-On table saws, sliding table saws, radial arm saws and vertical panel sizing saws

S1220- Holz-Her
SS1299-30, SS1300-30- Altendorf, Striebig

Design:
-Tooth configuration: 3 bevelled one side and 1 bevelled opposite side. Supplied in pairs 1 LH and 1 RH (order separately)
-Cutting material: TC XL4000
-Extra heavy plate provides added stability
-Expansion slots: Cu plugged

Application:
-For fine cut-off and mitre cuts of soft and hardwoods, and trimming of plywood, wood veneered and plastic laminated panels (single sided), or (double sided) using a pre-scoring unit
-On double cut-off machines and single or double anend tenoners

Design:
-Tooth configuration: ATB
-Cutting material: TC XL4000
-Expansion slots: Cu plugged

Application:
-For sizing cuts in veneered particleboard, hard fiberboard, raw MDF panels and high-density plywood in single sheets and stacks
-On panel sizing saws (Beam Saws)

Design:
-Tooth configuration: TCG
-Cutting material: TC XL4000
-Expansion slots: Cu plugged

Application:
-For sizing cuts in plastic laminated panels and plywood in single sheets and stacks
-On panel sizing saws (Beam Saws)

Design:
-Tooth configuration: Conicat ATB
-Cutting material: TC XL4000
-Expansion slots: Cu plugged

Application:
-For pre-scoring in plastic laminated sheets
-On panel sizing saws with pre-scoring units